fbpx

Commercial Roller Shutters

Open n Shut shutters specialise in the supply and install of quality South Australian made roller shutters and we have been operating in Adelaide for the past 15 years.

We are proud to service a wide range of customers within Adelaide and near country areas, so whether your decision on your home is to keep it cool in summer, warm in winter or to increase your security, Open n Shut shutters will be able to advise you as to the best solution.

Every client is important to our business; we have built our success on top quality products and outstanding service to our customers. We install our shutters to your home right the first time.

Available Colours

Bushfire Rated

bushfire2 The Bush Fire Rated is ideal for residential or commercial use, particularly in areas prone to fire hazards, making it the ideal option for BAL 40 rated Fire Shutters. Manufactured to the highest standards with state of the art equipment, the the Bush Fire Rated profile is available in a 40mm curved profile. The Bush Fire Rated has superior strength offering increased security and performance. fire1 The overall profile appearance is clean and stylish with only a slight “V” groove line on the convex side. Available in several long lasting and fade resistant Interpon coatings or a natural anodized finish, the Bush Fire Rated Profile can also be powder coated in a colour of your choice. It is common knowledge that hot or burning embers entering the home during a bushfire is a major factor in the ignition of the building itself. These Bush Fire Roller Shutters have been credited with saving homes from burning to the ground when other surrounding properties were not so fortunate. The Bush Fire BAL 40 Fire Shutters have been extensively tested by the CSIRO under severe bushfire simulated conditions and proved to be able to withstand a maximum radiant heat exposure of 40kw/m2 after 60 minutes. As no ignition or flaming was observed throughout the testing the Bush Fire Shutter has received a Bushfire Attack Level (BAL) of 40. bushfire1 curves1b4 fire2 fire3 fire4

Cyclone Rated

storm1 Since its inception our Cyclone Rated has consistently proven to be a high quality, robust and well accepted profile so therein provided the perfect solid platform on which to develop the Cyclone rated profile as an option for a Storm Shutter. The development and introduction of the High Density Foam (HDF) offers remarkable advantages where there is high wind or high risk. The HDF is injected into the slat profile under controlled conditions during the manufacturing roll-forming process. curves1b3 The Cyclone Rated is available in both restrained and non restrained options. Our HDF filled profile combined with restrained guides has been tested successfully to meet with cyclone category 3 regulations, while the HDF unrestrained provides an option with standard materials where extra strength and security is required. storm3 curves1b4 storn1 curves1b6

Widespan Series

wide1 The Wide Span Series profile is a double walled cavity with PU foam injected during the roll forming process. This profile is available for use on openings up to 50{26a4f076ca9b33cc9323e93e548e4d4f8eccdfa5ee7a9e5716980cc45cfde013} larger than our standard domestic profiles while maintaining the same level of strength and insulation qualities. ultra1 As an Australian Roller Shutter Manufacturer, we realizes it is important to be able to offer a diverse range of products to provide a diverse range of solutions in this harsh climate. The Wide Span Series is a curved profile which uses a minimal head box size, making it an ideal substitute for garage doors or commercial door applications where room for roll up is limited. Available in multiple colours, the Widespan Series has 2 profile lines on the convex side with a smooth finish on the concave. wide3 curves1b4 fire2 ultra2